Escavadoras De Demolição à venda

Explore 5 máquinas Escavadoras De Demolição no Machmon. Compare por modelo, localização e estado, depois contacte os vendedores através das opções de contacto disponíveis.
Anúncios classificados de 5
guia de compra

Escavadoras de demolição

Excavators built or converted for demolition work, from standard-boom machines fitted with shears and pulverisers to purpose-built high-reach rigs with multi-section booms for tall-structure teardown. Reinforced cabs, guarding and dedicated attachment plumbing separate these from general earthmoving carriers. Compare the specification and configuration of the live stock below against the job at hand.

Em stock63 máquinas32 mostram um preço
Preço habitual€25,900 - €350,000metade é vendida por menos de €75,538
Anos1990 a 2023novos e usados
Localizadas principalmente emAlemanha · Países Baixos · França
Peso operacional26.1 a 64.8 tintervalo típico
Potência do motor147 a 321 kWintervalo típico
Horas de motor1,012 a 14,830 hintervalo típico

Procurar por marca

Hitachi 25 Liebherr 10 Caterpillar 8 Volvo 6 Brokk 4 Komatsu 3 Doosan 2 Hyundai 2

Modelos populares

Caterpillar 330CL Volvo EC460LC HR Hitachi EX400LC Hyundai HX520L Hitachi KMC350-5 Hitachi KMC600P-6

Preços de Escavadoras de demolição

2006 Liebherr R 934B Demolition Excavator2006 · 15,110 h€25,900
Escavadora de Demolição Liebherr R944 VHHD de 20062006€48,000
2011 Liebherr LH22 C Escavadora de Demolição2011 · 12,663 h€54,900
2009 Hitachi ZX350LC-3 Demolition Excavator2009 · 16,210 h€79,900
2012 Doosan DX420LC Demolition Excavator2012 · 9,495 h€139,000
Escavadora de Demolição Volvo EC380EHR de 20162016 · 7,743 h€350,000

Escolher o tipo certo

High-reach vs standard-boomHigh-reach demolition fronts add a folding or telescopic extension for working heights well beyond a standard boom, built for multi-storey structures; a standard-boom carrier fitted with a shear or pulveriser suits lower-level and selective demolition.
Modular boom systemsPin-and-latch or quick-change boom sections let one base machine switch between standard digging configuration and an extended high-reach front without a full rebuild.
Guarding and cab protectionPolycarbonate front and top screens, FOPS-rated roof guarding (falling-object protection) and reinforced cab structures protect the operator from falling debris and are graded to different protection levels.
Attachment ecosystemsDedicated demolition circuits run shears, pulverisers, hydraulic breakers and grapples, usually through a quick-change coupler with matched flow and pressure settings for each tool.

O que verificar antes de comprar

Structural conditionInspect booms, arms and demolition fronts for cracks, distortion and repair welds around pin bosses and high-stress joints, common on machines that have worked at extended reach.
Guarding completenessConfirm all guarding is present and undamaged, including front and top screens and cab reinforcement, since missing or cracked panels affect both safety and compliance.
Hydraulic circuits for toolsCheck dedicated demolition-tool lines, quick couplers and control valves for leaks, wear and correct flow settings matched to the shears, pulverisers or breakers being run.
Working-height and stability setupReview documentation for maximum working height, reach and the counterweight or undercarriage configuration required to keep the machine stable at extension.

Perguntas frequentes

When do I need a high-reach machine instead of a standard boom with a long-reach attachment?

A high-reach front is built for sustained work at height on multi-storey structures, with the reach, stability and hydraulic capacity engineered in. A standard boom with an extension attachment suits lower structures and shorter, occasional jobs.

What guarding should a demolition excavator carry?

Expect a FOPS-rated roof (falling-object protection), polycarbonate front and top screens, and a reinforced cab structure as standard. The exact protection level should match the debris risk of the work, so check the guarding grade against the intended job.

Can one machine run shears, pulverisers and a breaker?

Yes, if it carries a quick-change coupler and hydraulic circuits sized for each tool's flow and pressure needs. Confirm the auxiliary circuit specification matches the attachment set you plan to run, not just the coupler fit.

How do I judge whether a boom has been overworked?

Look for repair welds, plating, or paint touch-ups around pin bosses and boom joints, and ask for service history. Machines used at maximum reach for long periods show stress there first, so a clean structural record matters.