Koparki na sprzedaż

Przeglądaj 14,540 maszyn Koparki na Machmon. Porównuj model, lokalizację i stan, a następnie skontaktuj się ze sprzedawcami przez dostępne opcje kontaktu.
Ogłoszenia 14,540
poradnik zakupowy

Koparki

Excavators span sub-tonne minis to large mining-class machines, covering digging, trenching, demolition, material handling and site clearance. The right pick depends on site access, ground conditions and the attachments the job needs. Compare the live stock below by type, size, hours and price once you know which sub-class fits.

Dostępne14,540 maszyn11,363 podaje cenę
Typowa cena€10,734 - €78,500połowa kosztuje mniej niż €26,004
Lataod 1970 do 2026nowe i używane
Najczęściej spotykane wChiny · Niemcy · Holandia
Masa roboczaod 3.5 do 36 ttypowy zakres
Moc silnikaod 22 do 224 kWtypowy zakres
Motogodzinyod 278 do 11,200 htypowy zakres

Przeglądaj Koparki

Koparki gąsienicowe 7,575 Minikoparki 4,898 Koparki kołowe 1,179 Maszyny do przeładunku materiałów 503 Koparki wyburzeniowe 63 Koparki amfibijne 26 Koparki linowe 19 Koparki kroczące 6

Szukaj według marki

Caterpillar 4,421 Komatsu 1,626 Hitachi 958 Volvo 792 Doosan 773 Kubota 665 Hyundai 651 Sany 552

Popularne modele

Caterpillar 320D Caterpillar 320D2 Caterpillar 320CL Caterpillar 320GC Caterpillar 320BL Caterpillar 320C

Ceny: Koparki

2022 Sany SY55 Koparka gąsienicowa2022€10,734
2015 Wacker Neuson ET24 Minikoparka2015 · 2,752 h€17,500
2024 Caterpillar 320D Gąsienicowa Koparka2024 · 800 h€23,011
2019 Caterpillar 305E2 Mini Excavator2019 · 2,196 h€30,450
2018 Koparka gąsienicowa Komatsu PC400-82018€45,335
2018 Caterpillar 320 Crawler Excavator2018 · 6,792 h€78,500

Wybór odpowiedniego typu

Crawler vs wheeledTracked machines grip soft or uneven ground and suit static dig work; wheeled excavators drive between sites on hard surfaces without a low-loader.
Compact vs full-sizeMini and midi excavators (roughly 1 to 10 t) work tight, access-limited sites; full-size machines dig deeper, lift more and move more material per cycle.
Demolition and long-reachHigh-reach demolition machines carry extended booms and reinforced cabs for building teardown; long-reach models trade breakout force for extended dig and reach depth in canals, dredging and deep excavation.
Material handlersRaised-cab, wheeled or tracked machines built for sorting, loading and scrap or waste handling rather than digging.
Specialist classesAmphibious and swamp excavators work wetlands and soft terrain; walking excavators (spider machines) climb slopes and work in confined or uneven ground.

Co sprawdzić przed zakupem

Undercarriage or tyresTracks, sprockets and rollers on crawler machines, or tyre condition and axle wear on wheeled ones, are the largest running-gear cost to budget for.
Hours vs conditionCompare the hour meter against wear on pins, bushings, boom seals and cab condition rather than treating hours alone as a value guide.
Hydraulics and attachmentsCheck hydraulic quick couplers, auxiliary lines and cylinder seals; the fitted attachment set changes both day-one usefulness and resale value.
Service historyA documented maintenance and repair record is the clearest signal of how a machine was actually run and looked after.

Częste pytania

How do I choose between crawler and wheeled?

Crawlers suit soft ground, static digging and maximum stability; wheeled excavators suit urban and utility work where the machine needs to relocate quickly along roads between jobs.

What size class covers most general work?

Midi to standard machines in the 10 to 30 tonne range cover most groundworks, trenching and foundation jobs. Go smaller for access-limited sites, larger for high-volume earthmoving or quarry work.

When does a specialist type make sense over a standard excavator?

Choose a specialist class when the site itself rules out a standard machine: wetlands and soft ground call for amphibious or swamp tracks, steep or uneven terrain calls for a walking excavator, and tall structures call for high-reach demolition rigs.

What separates a material handler from a standard excavator?

Material handlers use a raised cab for visibility over a load, a different hydraulic setup tuned for grabs and shears, and often a wheeled undercarriage, since they sort and load rather than dig.