Pelles Araignées à vendre

Parcourez 1 Pelles Araignées machine sur Machmon. Comparez modèle, lieu et état, puis contactez les vendeurs via les options de contact proposées.
Annonce unique
  • Ajouter aux favorisRetirer des favoris
    Pelle à jambes Menzi Muck M220 de 2018
    2018 Menzi Muck M220 walking excavator side view
    2018 Menzi Muck M220 walking excavator side view2018 Menzi Muck M220 walking excavator, rear three-quarter viewVoir toutes les photos
    Vous avez masqué cette annonce
    Pelle à jambes Menzi Muck M220 de 2018
    Occasion 2018 2,666 h
    Illkirch-Graffenstaden, France
    € 43,500 HT
    SARL GEST LEASE ING.
guide d'achat

Pelles araignées

Spider excavators with four individually articulated leg-and-wheel units, built to stand and dig on slopes, riverbeds, alpine terrain and forestry ground that a conventional tracked machine cannot reach. Each leg extends, retracts and rotates independently to level the chassis and hold position on uneven or steep ground. Compare the live stock below for leg reach, engine power and attachment fit.

En stock6 machines6 affichent un prix
Années1999 à 2018neuf et occasion
Principalement situés enFrance · Autriche · République tchèque

Rechercher par marque

Menzi Muck 5 Kaiser 1

Modèles populaires

Menzi Muck A71 T2 M Menzi Muck A91F MOBIL Menzi Muck M220 Menzi Muck M525 Menzi Muck M545 Kaiser X4M TURBOSTAR

Prix pour Pelles araignées

Pelle sur chenilles Kaiser X4M TURBOSTAR3,200 h€19,000
1999 Menzi Muck A71 T2 M Pelle sur jambes1999€30,780
Pelle à jambes Menzi Muck M220 de 20182018 · 2,666 h€43,500
2012 Menzi Muck A91F MOBIL Walking Excavator2012 · 8,234 h€54,900
2015 Menzi Muck M545 Pelle marcheuse2015 · 292 h€89,750

Choisir le bon type

Leg and wheel setupFour hydraulic legs with wheels or claw feet let the machine widen its stance, climb steps and level the body on slopes.
Claw feetSteel claws bolt onto the wheels for grip on rock, loose scree and riverbed material where rubber alone would slip.
Winch assistA mounted winch anchors the machine on the steepest slopes, holding position beyond what leg spread alone can manage.
Road travelWheeled models can drive between sites under their own power, cutting transport cost against a low-loader move.

À vérifier avant l'achat

Leg cylinders and pivotsCheck every leg cylinder for seal weep and each pivot pin and bush for play; a worn leg undermines stability on slopes.
Chassis stress cracksInspect the main frame and leg mounting points for cracks or repair welds, the areas that take the most load when levelling.
Operator skill and controlsThese machines demand a trained, experienced operator; check the control levers and leg-selection switches respond cleanly and match a well-kept cab.
Winch and safety kitConfirm the winch cable, drum and anchor points are sound, and that the ROPS/FOPS structure (roll-over and falling-object protection) and seatbelt are intact.

Questions fréquentes

What is a walking excavator used for?

Slope stabilisation, forestry, riverbank and waterway work, alpine construction and any site with gradients or uneven ground that would tip or bog a conventional excavator.

Do I need special training to run one?

Yes. Leg coordination, slope reading and winch use are distinct skills beyond standard excavator operation, and outcomes depend heavily on operator experience rather than the machine alone.

Wheels or claw feet?

Wheels suit road travel and mixed firm ground. Claw feet bolt on for rock, scree and riverbed work where extra grip prevents slipping on the slope.