Caterpillar 308C Мініекскаватори на продаж

Переглядайте 10 Caterpillar 308C Мініекскаватори техніки на Machmon. Порівнюйте за моделлю, місцем і станом, а потім зв'яжіться з продавцями через вказані варіанти запиту.
Оголошення 10
Caterpillar 308C · Мініекскаватори

Caterpillar 308C

A compact radius 8 tonne class Cat midi excavator sized for urban jobsites that still need real digging reach.

Основні характеристики

Operating weight
approx. 7430 to 7650 kg by track and stick choice (configuration dependent); dozer blade adds approx. 380 to 390 kg
Tail swing radius
1290 mm compact radius (CR) design
Maximum digging depth
4140 mm with 1665 mm stick, 4690 mm with 2210 mm stick
Maximum reach at ground level
6250 mm (medium stick) or 6770 mm (long stick)
Bucket digging force
44 kN (SAE) with either stick
Undercarriage
Caterpillar built track-type undercarriage; 450 mm triple grouser shoes standard, 600 mm shoes or 450 mm segmented rubber track optional

Огляд моделі

The Caterpillar 308C is an 8 tonne class midi excavator sold as the 308C CR, built with a compact tail swing radius of 1290 mm for urban and space-restricted sites. Caterpillar's specification document lists operating weights from approx. 7430 kg to 7650 kg depending on track and stick choice, a maximum digging depth of 4690 mm with the long stick, and a maximum reach at ground level of 6770 mm. It runs a 3.7 m boom with a choice of 1665 mm or 2210 mm sticks on a Caterpillar designed and built track-type undercarriage.

Коротко про головне

GenerationC Series midi (marketed as 308C CR), mid 2000s production; succeeded by the 308D and later 308E lines, so confirm the exact series on the serial plate when comparing listings.
Stick and blade configurationTwo factory sticks (1665 mm and 2210 mm) trade breakout force against dig depth and reach, and the dozer blade is optional; verify which setup a specific machine carries.
Tracks and undercarriage wearOffered with steel triple grouser shoes or segmented rubber track; on any used unit inspect track, sprocket, idler and roller wear, since undercarriage refurbishment is a major cost item on tracked machines.
Configuration dependenceOperating weight and lift capacity vary with shoe width, stick length and blade fitment; lift charts differ between blade-up and blade-down operation.

10 машин · €25,500 - €56,180 · від 2008 до 2021 · Японія, Польща, Румунія

Переглянути всі оголошення Caterpillar 308CВідкрити фільтри

Характеристики взято з s7d2.scene7.com (офіційна сторінка виробника).