Koparki na sprzedaż

Przeglądaj 3,821 maszyn Koparki na Machmon. Porównuj model, lokalizację i stan, a następnie skontaktuj się ze sprzedawcami przez dostępne opcje kontaktu.

poradnik zakupowy

Koparki

Excavators span sub-tonne minis to large mining-class machines, covering digging, trenching, demolition, material handling and site clearance. The right pick depends on site access, ground conditions and the attachments the job needs. Compare the live stock below by type, size, hours and price once you know which sub-class fits.

Dostępne13,555 maszyn10,541 podaje cenę

Typowa cena€10,500 - €78,273połowa kosztuje mniej niż €25,966

Lataod 1970 do 2026nowe i używane

Najczęściej spotykane wChiny · Niemcy · Holandia

Masa roboczaod 3.2 do 36 ttypowy zakres

Moc silnikaod 20 do 223 kWtypowy zakres

Motogodzinyod 269 do 11,290 htypowy zakres

Ceny: Koparki

2024 Kubota U-35 Mini Excavator2024 · 800 h€10,500

2025 XCMG XE35U Minikoparka2025 · 200 h€17,107

2024 Caterpillar 302.7 Minikoparka2024 · 10 h€22,950

2023 Doosan DH210W-7 Wheel Excavator2023 · 2,800 h€30,229

2009 Liebherr A 904 C Wheel Excavator2009 · 17,500 h€45,000

2021 JCB TM180 Mini Excavator2021 · 1,881 h€78,273

Wybór odpowiedniego typu

Crawler vs wheeledTracked machines grip soft or uneven ground and suit static dig work; wheeled excavators drive between sites on hard surfaces without a low-loader.

Compact vs full-sizeMini and midi excavators (roughly 1 to 10 t) work tight, access-limited sites; full-size machines dig deeper, lift more and move more material per cycle.

Demolition and long-reachHigh-reach demolition machines carry extended booms and reinforced cabs for building teardown; long-reach models trade breakout force for extended dig and reach depth in canals, dredging and deep excavation.

Material handlersRaised-cab, wheeled or tracked machines built for sorting, loading and scrap or waste handling rather than digging.

Specialist classesAmphibious and swamp excavators work wetlands and soft terrain; walking excavators (spider machines) climb slopes and work in confined or uneven ground.

Co sprawdzić przed zakupem

Undercarriage or tyresTracks, sprockets and rollers on crawler machines, or tyre condition and axle wear on wheeled ones, are the largest running-gear cost to budget for.

Hours vs conditionCompare the hour meter against wear on pins, bushings, boom seals and cab condition rather than treating hours alone as a value guide.

Hydraulics and attachmentsCheck hydraulic quick couplers, auxiliary lines and cylinder seals; the fitted attachment set changes both day-one usefulness and resale value.

Service historyA documented maintenance and repair record is the clearest signal of how a machine was actually run and looked after.

Częste pytania

How do I choose between crawler and wheeled?

Crawlers suit soft ground, static digging and maximum stability; wheeled excavators suit urban and utility work where the machine needs to relocate quickly along roads between jobs.

What size class covers most general work?

Midi to standard machines in the 10 to 30 tonne range cover most groundworks, trenching and foundation jobs. Go smaller for access-limited sites, larger for high-volume earthmoving or quarry work.

When does a specialist type make sense over a standard excavator?

Choose a specialist class when the site itself rules out a standard machine: wetlands and soft ground call for amphibious or swamp tracks, steep or uneven terrain calls for a walking excavator, and tall structures call for high-reach demolition rigs.

What separates a material handler from a standard excavator?

Material handlers use a raised cab for visibility over a load, a different hydraulic setup tuned for grabs and shears, and often a wheeled undercarriage, since they sort and load rather than dig.

Koparki na sprzedaż

Koparki

Przeglądaj Koparki

Szukaj według marki

Popularne modele

Ceny: Koparki

Wybór odpowiedniego typu

Co sprawdzić przed zakupem

Częste pytania