Minikoparki na sprzedaż

Przeglądaj 1,032 maszyn Minikoparki na Machmon. Porównuj model, lokalizację i stan, a następnie skontaktuj się ze sprzedawcami przez dostępne opcje kontaktu.

poradnik zakupowy

Minikoparki

Compact tracked and wheeled diggers, roughly 1 to 8 tonnes, for trenching, landscaping, utilities and tight-site work. Understand the class below, then compare the live stock by make, year, hours and price.

Dostępne4,672 maszyn3,979 podaje cenę

Typowa cena€8,800 - €45,000połowa kosztuje mniej niż €16,619

Lataod 1989 do 2026nowe i używane

Najczęściej spotykane wChiny · Niemcy · Holandia

Szukaj według marki

Caterpillar 710 Kubota 641 Komatsu 513 Hitachi 219 Yanmar 196 Doosan 194 Sany 191 Volvo 187

Popularne modele

Caterpillar 306E2 Caterpillar 305.5E2 Hitachi ZX70 Sany SY75C Komatsu PC35MR Komatsu PC70-8

Wybór odpowiedniego typu

Canopy vs cabOpen ROPS canopy for visibility and cost; enclosed cab for weather, noise and all-season comfort.

Zero tail swingThe housing stays inside the tracks when slewing, the pick for walls, kerbs and tight urban sites.

Conventional tailThe overhanging counterweight buys more stability and lift than a zero-tail machine of the same weight.

Weight classAround 1 t fits through doorways, 3 to 5 t is the general-purpose sweet spot, 6 to 8 t nears full-size digging.

Co sprawdzić przed zakupem

UndercarriageRubber tracks, sprockets and rollers are the big wear cost; a tired undercarriage should show in the price.

Hours vs ageMinis often log low hours; verify the meter matches wear on pins, bushes and pedals.

Coupler and bucketsA hydraulic quick coupler and a bucket set change the machine's day-one usefulness and its value.

Transport weightConfirm real operating weight against your trailer and licence limits before you commit.

Częste pytania

Which size class do I need?

Under 2 t for indoor and garden access, 3 to 5 t for general groundworks, 6 to 8 t when you need near full-size dig depth but still want easy transport.

Is zero tail swing worth it?

On confined sites, usually yes: you trade a little lift capacity for the freedom to slew anywhere. On open ground a conventional tail gives more machine per euro.

What counts as high hours?

Expect roughly 800 to 1,200 hours per year of normal use. Judge hours against age, service history and undercarriage condition rather than as a bare number.

Track or wheels?

Tracks grip and spread weight on soft ground and are the default on minis; wheeled models suit utility work that moves along hard surfaces between jobs.