Geen actuele Caterpillar 303.5E Minigraafmachines-advertenties
Er zijn momenteel geen Caterpillar 303.5E Minigraafmachines-advertenties op deze route. Bekijk een bredere categorie, verwijder filters of kom later terug.
Geen resultaten gevonden
Probeer filters te verwijderen of bekijk de volledige catalogus.
Belangrijkste specificaties
- Engine
- Cat C1.8, 23.6 kW (31.6 hp) net power (ISO 9249) at 2400 rpm
- Operating weight
- approx. 3548 kg with canopy, 3732 kg with cab (configuration dependent)
- Maximum digging depth
- 2880 mm (standard stick)
- Maximum reach at ground line
- 5060 mm (standard stick)
- Tail swing radius
- 890 mm (compact radius design)
- Hydraulics
- Load sensing system, 87.6 L/min pump flow, 60 L/min primary auxiliary circuit
Modeloverzicht
The Caterpillar 303.5E is a 3.5 tonne class mini hydraulic excavator from Cat's E Series, sold as the 303.5E CR with a compact radius design and a large integrated counterweight for stability. Caterpillar's specification sheet lists a Cat C1.8 engine with 23.6 kW (31.6 hp) net power, an operating weight of approx. 3548 kg with canopy or 3732 kg with cab, and a maximum digging depth of 2880 mm. Cat positions it for high performance in tight, space-restricted applications, with load sensing hydraulics and over 200 degrees of bucket rotation for truck loading and vertical wall digging.
In het kort
GenerationE Series (marketed as 303.5E CR); succeeded by the 303.5E2 CR and the current 303.5 CR, so confirm the exact series letter on the serial plate when comparing listings.
Canopy vs cabCanopy with FOPS/TOPS (falling-object and tip-over) protection is the factory standard; the enclosed cab with heater and air conditioning is optional and adds around 180 kg, so check which configuration a used unit carries.
Tracks and undercarriageRubber tracks are standard with steel track optional; on any used mini check track wear, sprocket and roller condition, since undercarriage refurbishment is a major cost item.
Configuration dependenceWeight and dig figures vary with stick, blade, track and cab options; standard equipment includes a swing boom, dozer blade with float and two-way auxiliary hydraulic lines.
Specificaties afkomstig van s7d2.scene7.com (officiële fabrikantenpagina).
