Escavatori Da Demolizione in vendita

Sfoglia 4 macchine Escavatori Da Demolizione su Machmon. Confronta modello, posizione e stato, poi contatta i venditori con le opzioni di richiesta indicate.
Annunci 4
  • Aggiungi ai preferitiRimuovi dai preferiti
    2007 Liebherr R954C HDV Escavatore Demolizione
    2007 Liebherr R954C HDV demolition excavator side view
    2007 Liebherr R954C HDV demolition excavator side view2007 Liebherr R954C HDV demolition excavator side viewVedi tutte le foto
    Hai nascosto questo annuncio
    2007 Liebherr R954C HDV Escavatore Demolizione
    Usato 2007 9,565 h 72.5 t 239.4 kW
    Nunspeet, Paesi Bassi
    € 159,500 IVA esclusa
    CHESS INTERNATIONAL TRADING COMPANY B.V.
  • Aggiungi ai preferitiRimuovi dai preferiti
    Escavatore Demolizione Volvo EC380DHR UHD del 2013
    2013 Volvo EC380DHR UHD demolition excavator, side view
    2013 Volvo EC380DHR UHD demolition excavator, side view2013 Volvo EC380DHR UHD demolition excavator, side view with detached boomVedi tutte le foto
    Hai nascosto questo annuncio
    Escavatore Demolizione Volvo EC380DHR UHD del 2013
    Usato 2013 8,954 h 49.9 t 218.5 kW
    Veghel, Paesi Bassi
    € 117,950 IVA esclusa
    BAS World
  • Aggiungi ai preferitiRimuovi dai preferiti
    2000 Volvo EC460LC HR Demolition Excavator
    2000 Volvo EC460LC HR Demolition Excavator
    2000 Volvo EC460LC HR Demolition Excavator2000 Volvo EC460LC HR Demolition ExcavatorVedi tutte le foto
    Hai nascosto questo annuncio
    2000 Volvo EC460LC HR Demolition Excavator
    Usato 2000 8,985 h 46.3 t
    Deurne, Paesi Bassi
    Prezzo su richiesta
    Delta Machinery
  • Aggiungi ai preferitiRimuovi dai preferiti
    2012 Doosan DX420LC Demolition Excavator
    2012 Doosan DX420LC Demolition Excavator
    2012 Doosan DX420LC Demolition Excavator2012 Doosan DX420LC Demolition ExcavatorVedi tutte le foto
    Hai nascosto questo annuncio
    2012 Doosan DX420LC Demolition Excavator
    Usato 2012 9,495 h 42.2 t
    Baienfurt, Germania
    € 139,000 IVA esclusa
    Kiesel Used GmbH
guida all'acquisto

Escavatori da demolizione

Excavators built or converted for demolition work, from standard-boom machines fitted with shears and pulverisers to purpose-built high-reach rigs with multi-section booms for tall-structure teardown. Reinforced cabs, guarding and dedicated attachment plumbing separate these from general earthmoving carriers. Compare the specification and configuration of the live stock below against the job at hand.

Disponibile64 macchine32 mostrano un prezzo
Prezzo tipico€25,900 - €350,000metà vendono a meno di €75,538
Annida 1990 a 2023nuovi e usati
Situati principalmente inGermania · Paesi Bassi · Francia
Peso operativoda 26.1 a 64.8 tintervallo tipico
Potenza motoreda 147 a 242 kWintervallo tipico
Ore motoreda 1,012 a 14,830 hintervallo tipico

Cerca per marca

Hitachi 25 Liebherr 10 Caterpillar 9 Volvo 6 Brokk 4 Komatsu 3 Doosan 2 Hyundai 2

Modelli popolari

Caterpillar 330CL Volvo EC460LC HR Hitachi EX400LC Hyundai HX520L Hitachi KMC350-5 Hitachi KMC600P-6

Prezzi per Escavatori da demolizione

2006 Liebherr R 934B Demolition Excavator2006 · 15,110 h€25,900
2006 Liebherr R944 VHHD Escavatore Demolizione Cingolato2006€48,000
2011 Liebherr LH22 C Escavatore Demolizione2011 · 12,663 h€54,900
2009 Hitachi ZX350LC-3 Demolition Excavator2009 · 16,210 h€79,900
2012 Doosan DX420LC Demolition Excavator2012 · 9,495 h€139,000
Escavatore per demolizioni Volvo EC380EHR del 20162016 · 7,743 h€350,000

Scegliere il tipo giusto

High-reach vs standard-boomHigh-reach demolition fronts add a folding or telescopic extension for working heights well beyond a standard boom, built for multi-storey structures; a standard-boom carrier fitted with a shear or pulveriser suits lower-level and selective demolition.
Modular boom systemsPin-and-latch or quick-change boom sections let one base machine switch between standard digging configuration and an extended high-reach front without a full rebuild.
Guarding and cab protectionPolycarbonate front and top screens, FOPS-rated roof guarding (falling-object protection) and reinforced cab structures protect the operator from falling debris and are graded to different protection levels.
Attachment ecosystemsDedicated demolition circuits run shears, pulverisers, hydraulic breakers and grapples, usually through a quick-change coupler with matched flow and pressure settings for each tool.

Cosa controllare prima dell'acquisto

Structural conditionInspect booms, arms and demolition fronts for cracks, distortion and repair welds around pin bosses and high-stress joints, common on machines that have worked at extended reach.
Guarding completenessConfirm all guarding is present and undamaged, including front and top screens and cab reinforcement, since missing or cracked panels affect both safety and compliance.
Hydraulic circuits for toolsCheck dedicated demolition-tool lines, quick couplers and control valves for leaks, wear and correct flow settings matched to the shears, pulverisers or breakers being run.
Working-height and stability setupReview documentation for maximum working height, reach and the counterweight or undercarriage configuration required to keep the machine stable at extension.

Domande frequenti

When do I need a high-reach machine instead of a standard boom with a long-reach attachment?

A high-reach front is built for sustained work at height on multi-storey structures, with the reach, stability and hydraulic capacity engineered in. A standard boom with an extension attachment suits lower structures and shorter, occasional jobs.

What guarding should a demolition excavator carry?

Expect a FOPS-rated roof (falling-object protection), polycarbonate front and top screens, and a reinforced cab structure as standard. The exact protection level should match the debris risk of the work, so check the guarding grade against the intended job.

Can one machine run shears, pulverisers and a breaker?

Yes, if it carries a quick-change coupler and hydraulic circuits sized for each tool's flow and pressure needs. Confirm the auxiliary circuit specification matches the attachment set you plan to run, not just the coupler fit.

How do I judge whether a boom has been overworked?

Look for repair welds, plating, or paint touch-ups around pin bosses and boom joints, and ask for service history. Machines used at maximum reach for long periods show stress there first, so a clean structural record matters.