No current Komatsu PC30 Mini Excavators listings
Key specifications
- European designation
- PC30MR-5, current on komatsu.eu
- Engine power (PC30MR-5)
- 18.2 kW / 24.4 hp, 1.64-litre electronically controlled engine
- Fuel use (PC30MR-5 vs MR-3)
- Up to 5 percent lower, per Komatsu, with no loss of performance
- Design focus
- Tight tail swing radius and swing booms for confined-space digging
- Range position
- Smaller tier of the MR-5 range, alongside the PC35MR-5, PC45MR-5 and PC55MR-5
- Manufacturing site
- Komatsu Italia Manufacturing, Este, Italy
- Earlier PC30MR generations
- MR-3, MR-2 and MRx are listed in Komatsu's European product archive, not the current range
Model overview
Komatsu's PC30 was a long-running 3-tonne class mini excavator, and its current European equivalent on komatsu.eu is the PC30MR-5, part of Komatsu's MR-5 mini excavator range built for confined jobsites, utility work, landscaping and similar applications. The PC30MR-5 carries a tight tail swing radius and swing booms that hug the machine body for close-quarters digging, an electronically controlled 1.64-litre engine rated at 18.2 kW (24.4 hp), and Komatsu states it uses up to five percent less fuel than its MR-3 predecessor with no loss of performance. Earlier PC30MR generations (MR-3, MR-2, MRx) sit in Komatsu's European product archive. Live listings may span any PC30 generation, so check each machine's actual model plate and hour meter against these figures before comparing.
At a glance
Specifications sourced from komatsu.eu (official manufacturer page).
