Satılık Yıkım Ekskavatörleri

Machmon'da 1 Yıkım Ekskavatörleri makineye göz atın. Model, konum ve duruma göre karşılaştırın, ardından sunulan iletişim seçenekleriyle satıcılarla iletişime geçin.
Tek İlan
satın alma rehberi

Yıkım ekskavatörleri

Excavators built or converted for demolition work, from standard-boom machines fitted with shears and pulverisers to purpose-built high-reach rigs with multi-section booms for tall-structure teardown. Reinforced cabs, guarding and dedicated attachment plumbing separate these from general earthmoving carriers. Compare the specification and configuration of the live stock below against the job at hand.

Stokta58 makine27 fiyat gösteriyor
Tipik fiyat€48,000 - €359,000yarısı €79,900 altında satılıyor
Yıl1990 - 2023 arasısıfır ve ikinci el
Çoğunlukla şu ülkelerde bulunuyorAlmanya · Fransa · Hollanda
Çalışma ağırlığı30 - 64.8 arası ttipik aralık
Motor gücü128 - 321 arası kWtipik aralık
Motor saati1,157 - 14,300 arası htipik aralık

Markaya göre bul

Hitachi 25 Liebherr 10 Volvo 6 Brokk 4 Caterpillar 3 Komatsu 3 Doosan 2 Hyundai 2

Popüler modeller

Volvo EC460LC HR Hitachi EX400LC Hyundai HX520L Hitachi KMC350-5 Hitachi KMC600P-6 Hitachi KTEG KMC500 S-6

Yıkım ekskavatörleri fiyatları

1992 Nobas UB1236 Yıkım Ekskavatörü1992€48,000
1990 Hitachi EX400LC Demolition Excavator1990 · 12,800 h€49,900
2008 Liebherr R944C V LITRONIC Yıkım Ekskavatörü2008 · 10,592 h€69,900
2018 Brokk 400 Yıkım Ekskavatörü2018 · 1,157 h€82,337
2014 JCB JS360 Yıkım Ekskavatörü2014 · 5,500 h€155,900
2020 Sennebogen 825 E Yıkım Ekskavatörü2020 · 300 h€359,000

Doğru türü seçmek

High-reach vs standard-boomHigh-reach demolition fronts add a folding or telescopic extension for working heights well beyond a standard boom, built for multi-storey structures; a standard-boom carrier fitted with a shear or pulveriser suits lower-level and selective demolition.
Modular boom systemsPin-and-latch or quick-change boom sections let one base machine switch between standard digging configuration and an extended high-reach front without a full rebuild.
Guarding and cab protectionPolycarbonate front and top screens, FOPS-rated roof guarding (falling-object protection) and reinforced cab structures protect the operator from falling debris and are graded to different protection levels.
Attachment ecosystemsDedicated demolition circuits run shears, pulverisers, hydraulic breakers and grapples, usually through a quick-change coupler with matched flow and pressure settings for each tool.

Satın almadan önce kontrol edilecekler

Structural conditionInspect booms, arms and demolition fronts for cracks, distortion and repair welds around pin bosses and high-stress joints, common on machines that have worked at extended reach.
Guarding completenessConfirm all guarding is present and undamaged, including front and top screens and cab reinforcement, since missing or cracked panels affect both safety and compliance.
Hydraulic circuits for toolsCheck dedicated demolition-tool lines, quick couplers and control valves for leaks, wear and correct flow settings matched to the shears, pulverisers or breakers being run.
Working-height and stability setupReview documentation for maximum working height, reach and the counterweight or undercarriage configuration required to keep the machine stable at extension.

Sık sorulan sorular

When do I need a high-reach machine instead of a standard boom with a long-reach attachment?

A high-reach front is built for sustained work at height on multi-storey structures, with the reach, stability and hydraulic capacity engineered in. A standard boom with an extension attachment suits lower structures and shorter, occasional jobs.

What guarding should a demolition excavator carry?

Expect a FOPS-rated roof (falling-object protection), polycarbonate front and top screens, and a reinforced cab structure as standard. The exact protection level should match the debris risk of the work, so check the guarding grade against the intended job.

Can one machine run shears, pulverisers and a breaker?

Yes, if it carries a quick-change coupler and hydraulic circuits sized for each tool's flow and pressure needs. Confirm the auxiliary circuit specification matches the attachment set you plan to run, not just the coupler fit.

How do I judge whether a boom has been overworked?

Look for repair welds, plating, or paint touch-ups around pin bosses and boom joints, and ask for service history. Machines used at maximum reach for long periods show stress there first, so a clean structural record matters.