Bageri Za Rušenje na prodaju

Pregledajte 1 Bageri Za Rušenje stroj na Machmonu. Usporedite model, lokaciju i stanje, a zatim kontaktirajte prodavače putem ponuđenih opcija upita.
Pojedinačni oglas
  • Dodaj u favoriteUkloni iz favorita
    2022 Caterpillar 326D2L Demolition Excavator
    2022 Caterpillar 326D2L Demolition Excavator
    2022 Caterpillar 326D2L Demolition Excavator2022 Caterpillar 326D2L Demolition ExcavatorPogledaj sve fotografije
    Sakrili ste ovaj oglas.
    2022 Caterpillar 326D2L Demolition Excavator
    Rabljeni 2022 631 h 26.1 t 146.9 kW
    Hefei, Kina
    € 34,000 bez PDV-a
    CHINKE ENGINEERING EQUIPMENT COMPANY LIMITED
vodič za kupnju

Bageri za rušenje

Excavators built or converted for demolition work, from standard-boom machines fitted with shears and pulverisers to purpose-built high-reach rigs with multi-section booms for tall-structure teardown. Reinforced cabs, guarding and dedicated attachment plumbing separate these from general earthmoving carriers. Compare the specification and configuration of the live stock below against the job at hand.

Na zalihi63 strojeva32 prikazuje cijenu
Uobičajena cijena€25,900 - €350,000polovica se prodaje ispod €75,538
Godineod 1990 do 2023novi i rabljeni
Uglavnom se nalaze uNjemačka · Nizozemska · Francuska
Radna masaod 26.1 do 64.8 ttipičan raspon
Snaga motoraod 147 do 321 kWtipičan raspon
Radni satiod 1,012 do 14,830 htipičan raspon

Pretraži po marki

Hitachi 25 Liebherr 10 Caterpillar 8 Volvo 6 Brokk 4 Komatsu 3 Doosan 2 Hyundai 2

Popularni modeli

Caterpillar 330CL Volvo EC460LC HR Hitachi EX400LC Hyundai HX520L Hitachi KMC350-5 Hitachi KMC600P-6

Cijene za Bageri za rušenje

2006 Liebherr R 934B Demolition Excavator2006 · 15,110 h€25,900
2006 Liebherr R944 VHHD Bager za rušenje2006€48,000
2011 Liebherr LH22 C Bager za rušenje2011 · 12,663 h€54,900
2009 Hitachi ZX350LC-3 Demolition Excavator2009 · 16,210 h€79,900
2012 Doosan DX420LC Demolition Excavator2012 · 9,495 h€139,000
2016 Volvo EC380EHR Bager za rušenje2016 · 7,743 h€350,000

Odabir pravog tipa

High-reach vs standard-boomHigh-reach demolition fronts add a folding or telescopic extension for working heights well beyond a standard boom, built for multi-storey structures; a standard-boom carrier fitted with a shear or pulveriser suits lower-level and selective demolition.
Modular boom systemsPin-and-latch or quick-change boom sections let one base machine switch between standard digging configuration and an extended high-reach front without a full rebuild.
Guarding and cab protectionPolycarbonate front and top screens, FOPS-rated roof guarding (falling-object protection) and reinforced cab structures protect the operator from falling debris and are graded to different protection levels.
Attachment ecosystemsDedicated demolition circuits run shears, pulverisers, hydraulic breakers and grapples, usually through a quick-change coupler with matched flow and pressure settings for each tool.

Što provjeriti prije kupnje

Structural conditionInspect booms, arms and demolition fronts for cracks, distortion and repair welds around pin bosses and high-stress joints, common on machines that have worked at extended reach.
Guarding completenessConfirm all guarding is present and undamaged, including front and top screens and cab reinforcement, since missing or cracked panels affect both safety and compliance.
Hydraulic circuits for toolsCheck dedicated demolition-tool lines, quick couplers and control valves for leaks, wear and correct flow settings matched to the shears, pulverisers or breakers being run.
Working-height and stability setupReview documentation for maximum working height, reach and the counterweight or undercarriage configuration required to keep the machine stable at extension.

Česta pitanja

When do I need a high-reach machine instead of a standard boom with a long-reach attachment?

A high-reach front is built for sustained work at height on multi-storey structures, with the reach, stability and hydraulic capacity engineered in. A standard boom with an extension attachment suits lower structures and shorter, occasional jobs.

What guarding should a demolition excavator carry?

Expect a FOPS-rated roof (falling-object protection), polycarbonate front and top screens, and a reinforced cab structure as standard. The exact protection level should match the debris risk of the work, so check the guarding grade against the intended job.

Can one machine run shears, pulverisers and a breaker?

Yes, if it carries a quick-change coupler and hydraulic circuits sized for each tool's flow and pressure needs. Confirm the auxiliary circuit specification matches the attachment set you plan to run, not just the coupler fit.

How do I judge whether a boom has been overworked?

Look for repair welds, plating, or paint touch-ups around pin bosses and boom joints, and ask for service history. Machines used at maximum reach for long periods show stress there first, so a clean structural record matters.