Εκσκαφείς προς πώληση

Περιηγηθείτε σε 2,355 Εκσκαφείς μηχανήματα στο Machmon. Συγκρίνετε μοντέλο, τοποθεσία και κατάσταση, και επικοινωνήστε με τους πωλητές μέσω των διαθέσιμων επιλογών.
2,355 Αγγελίες
οδηγός αγοράς

Εκσκαφείς

Excavators span sub-tonne minis to large mining-class machines, covering digging, trenching, demolition, material handling and site clearance. The right pick depends on site access, ground conditions and the attachments the job needs. Compare the live stock below by type, size, hours and price once you know which sub-class fits.

Σε απόθεμα13,555 μηχανήματα20,875 εμφανίζουν τιμή
Συνήθης τιμή€10,638 - €78,324τα μισά πωλούνται κάτω από €26,000
Χρόνια1970 έως 2026καινούργια και μεταχειρισμένα
Βρίσκονται κυρίως σεΚίνα · Γερμανία · Ολλανδία

Περιηγηθείτε στο Εκσκαφείς

Εκσκαφείς με ερπύστριες 6,879 Μίνι εκσκαφείς 4,660 Εκσκαφείς με τροχούς 1,132 Μηχανές διαχείρισης υλικών 494 Εκσκαφείς κατεδάφισης 64 Αμφίβιοι εκσκαφείς 24 Εκσκαφείς τύπου dragline 19 Εκσκαφείς τύπου αράχνης 6

Αναζήτηση ανά μάρκα

Caterpillar 3,451 Komatsu 1,624 Hitachi 957 Volvo 789 Doosan 772 Kubota 664 Hyundai 649 Sany 551

Δημοφιλή μοντέλα

Caterpillar 320D2 Caterpillar 320D Caterpillar 320GC Caterpillar 320CL Sany SY215C Hyundai R220LC-9S

Επιλογή του σωστού τύπου

Crawler vs wheeledTracked machines grip soft or uneven ground and suit static dig work; wheeled excavators drive between sites on hard surfaces without a low-loader.
Compact vs full-sizeMini and midi excavators (roughly 1 to 10 t) work tight, access-limited sites; full-size machines dig deeper, lift more and move more material per cycle.
Demolition and long-reachHigh-reach demolition machines carry extended booms and reinforced cabs for building teardown; long-reach models trade breakout force for extended dig and reach depth in canals, dredging and deep excavation.
Material handlersRaised-cab, wheeled or tracked machines built for sorting, loading and scrap or waste handling rather than digging.
Specialist classesAmphibious and swamp excavators work wetlands and soft terrain; walking excavators (spider machines) climb slopes and work in confined or uneven ground.

Τι να ελέγξετε πριν την αγορά

Undercarriage or tyresTracks, sprockets and rollers on crawler machines, or tyre condition and axle wear on wheeled ones, are the largest running-gear cost to budget for.
Hours vs conditionCompare the hour meter against wear on pins, bushings, boom seals and cab condition rather than treating hours alone as a value guide.
Hydraulics and attachmentsCheck hydraulic quick couplers, auxiliary lines and cylinder seals; the fitted attachment set changes both day-one usefulness and resale value.
Service historyA documented maintenance and repair record is the clearest signal of how a machine was actually run and looked after.

Συχνές ερωτήσεις

How do I choose between crawler and wheeled?

Crawlers suit soft ground, static digging and maximum stability; wheeled excavators suit urban and utility work where the machine needs to relocate quickly along roads between jobs.

What size class covers most general work?

Midi to standard machines in the 10 to 30 tonne range cover most groundworks, trenching and foundation jobs. Go smaller for access-limited sites, larger for high-volume earthmoving or quarry work.

When does a specialist type make sense over a standard excavator?

Choose a specialist class when the site itself rules out a standard machine: wetlands and soft ground call for amphibious or swamp tracks, steep or uneven terrain calls for a walking excavator, and tall structures call for high-reach demolition rigs.

What separates a material handler from a standard excavator?

Material handlers use a raised cab for visibility over a load, a different hydraulic setup tuned for grabs and shears, and often a wheeled undercarriage, since they sort and load rather than dig.