حفارات للبيع

تصفح إعلانات 1,340 حفارات على Machmon. قارن الآلات المتاحة حسب الموديل والموقع والحالة، ثم اتصل بالبائعين باستخدام خيارات الاستفسار المتاحة.

حفارات · buying guide

حفارات

Excavators span sub-tonne minis to large mining-class machines, covering digging, trenching, demolition, material handling and site clearance. The right pick depends on site access, ground conditions and the attachments the job needs. Compare the live stock below by type, size, hours and price once you know which sub-class fits.

متوفر في المخزون13,557 آلة20,879 with visible price

Typical price€10,638 - €78,408median €26,004

نطاق السنة1970 إلى 2026new and used

Top seller countriesالصين · ألمانيا · هولندا6,551 · 1,879 · 1,393

Types you'll choose between

Crawler vs wheeledTracked machines grip soft or uneven ground and suit static dig work; wheeled excavators drive between sites on hard surfaces without a low-loader.

Compact vs full-sizeMini and midi excavators (roughly 1 to 10 t) work tight, access-limited sites; full-size machines dig deeper, lift more and move more material per cycle.

Demolition and long-reachHigh-reach demolition machines carry extended booms and reinforced cabs for building teardown; long-reach models trade breakout force for extended dig and reach depth in canals, dredging and deep excavation.

Material handlersRaised-cab, wheeled or tracked machines built for sorting, loading and scrap or waste handling rather than digging.

Specialist classesAmphibious and swamp excavators work wetlands and soft terrain; walking excavators (spider machines) climb slopes and work in confined or uneven ground.

What to check before buying

Undercarriage or tyresTracks, sprockets and rollers on crawler machines, or tyre condition and axle wear on wheeled ones, are the largest running-gear cost to budget for.

Hours vs conditionCompare the hour meter against wear on pins, bushings, boom seals and cab condition rather than treating hours alone as a value guide.

Hydraulics and attachmentsCheck hydraulic quick couplers, auxiliary lines and cylinder seals; the fitted attachment set changes both day-one usefulness and resale value.

Service historyA documented maintenance and repair record is the clearest signal of how a machine was actually run and looked after.

Common questions

How do I choose between crawler and wheeled?

Crawlers suit soft ground, static digging and maximum stability; wheeled excavators suit urban and utility work where the machine needs to relocate quickly along roads between jobs.

What size class covers most general work?

Midi to standard machines in the 10 to 30 tonne range cover most groundworks, trenching and foundation jobs. Go smaller for access-limited sites, larger for high-volume earthmoving or quarry work.

When does a specialist type make sense over a standard excavator?

Choose a specialist class when the site itself rules out a standard machine: wetlands and soft ground call for amphibious or swamp tracks, steep or uneven terrain calls for a walking excavator, and tall structures call for high-reach demolition rigs.

What separates a material handler from a standard excavator?

Material handlers use a raised cab for visibility over a load, a different hydraulic setup tuned for grabs and shears, and often a wheeled undercarriage, since they sort and load rather than dig.

13,557 آلة · €10,638 - €78,408 · 1970 إلى 2026 · الصين, ألمانيا, هولندا

عرض جميع إعلانات حفارات فتح الفلاتر

حفارات للبيع

حفارات

تصفح حفارات

Find by make

Popular models

Types you'll choose between

What to check before buying

Common questions