Komatsu PC30 حفارات صغيرة للبيع

تصفح 4 آلات Komatsu PC30 حفارات صغيرة على Machmon. قارن حسب الطراز والموقع والحالة، ثم تواصل مع البائعين عبر خيارات الاستفسار المتاحة.
4 إعلانات مبوبة

  • إضافة إلى المفضلةإزالة من المفضلة
    حفارة صغيرة Komatsu PC30MR موديل 2022
    لقد أخفيت هذا الإعلان
    حفارة صغيرة Komatsu PC30MR موديل 2022
    مستعمل20222,000 h3.3 t17.9 kW
    Shanghai, الصين
     7,300 باستثناء ضريبة القيمة المضافة
    Hengsheng Machinery Trading Co., Limited
  • إضافة إلى المفضلةإزالة من المفضلة
    2024 Komatsu KOMATSU 35-3 حفارة صغيرة
    لقد أخفيت هذا الإعلان
    2024 Komatsu KOMATSU 35-3 حفارة صغيرة
    مستعمل20241,100 h3.1 t217 kW
    Shanghai, الصين
     9,801 باستثناء ضريبة القيمة المضافة
    Shanghai Walila Engineering Machinery Co., Ltd.
  • إضافة إلى المفضلةإزالة من المفضلة
    2018 Komatsu PC30 حفارة صغيرة
    لقد أخفيت هذا الإعلان
    2018 Komatsu PC30 حفارة صغيرة
    مستعمل20183,000 h3 t19.4 kW
    Hefei, الصين
     10,718 باستثناء ضريبة القيمة المضافة
    Evergreen Machinery Ltd
  • إضافة إلى المفضلةإزالة من المفضلة
    2020 Komatsu PC30 حفار صغير
    لقد أخفيت هذا الإعلان
    2020 Komatsu PC30 حفار صغير
    مستعمل20201,126 h
    Hefei, الصين
     11,200 باستثناء ضريبة القيمة المضافة
    CHINKE ENGINEERING EQUIPMENT COMPANY LIMITED
Komatsu PC30 · حفارات صغيرة

Komatsu PC30

Use the Komatsu PC30 stock above to compare year, hours, seller location and visible price across PC30 generations.

المواصفات الرئيسية

European designation
PC30MR-5, current on komatsu.eu
Engine power (PC30MR-5)
18.2 kW / 24.4 hp, 1.64-litre electronically controlled engine
Fuel use (PC30MR-5 vs MR-3)
Up to 5 percent lower, per Komatsu, with no loss of performance
Design focus
Tight tail swing radius and swing booms for confined-space digging
Range position
Smaller tier of the MR-5 range, alongside the PC35MR-5, PC45MR-5 and PC55MR-5
Manufacturing site
Komatsu Italia Manufacturing, Este, Italy
Earlier PC30MR generations
MR-3, MR-2 and MRx are listed in Komatsu's European product archive, not the current range

نظرة عامة على الموديل

Komatsu's PC30 was a long-running 3-tonne class mini excavator, and its current European equivalent on komatsu.eu is the PC30MR-5, part of Komatsu's MR-5 mini excavator range built for confined jobsites, utility work, landscaping and similar applications. The PC30MR-5 carries a tight tail swing radius and swing booms that hug the machine body for close-quarters digging, an electronically controlled 1.64-litre engine rated at 18.2 kW (24.4 hp), and Komatsu states it uses up to five percent less fuel than its MR-3 predecessor with no loss of performance. Earlier PC30MR generations (MR-3, MR-2, MRx) sit in Komatsu's European product archive. Live listings may span any PC30 generation, so check each machine's actual model plate and hour meter against these figures before comparing.

نظرة سريعة

Confirm the generationPC30 stock spans several MR generations, so check the model plate (MR-5, MR-3, MR-2 or MRx) before comparing specs or price.
Route matchConfirm each listing is the Komatsu PC30 route before comparing price, year and seller details.
Visible price and POA stockCompare priced listings separately from machines where the seller asks for enquiry before quoting.
Hours, year and configurationUse the live filters and listing cards to compare age, operating hours and visible configuration details.

4672 آلة · €390 - €498,960 · 1989 إلى 2026 · الصين, ألمانيا, هولندا

المواصفات مأخوذة من komatsu.eu (الصفحة الرسمية للشركة المصنعة).